Introducing IoZ System!
The first app-based combination light switch and thermostat. IoZ System solves the problem of rooms that are too hot or too cold because the thermostat is in the wrong place. Invis-A-Stat is the key to the IoZ System providing room-by-room temperature control without the obstacle of running wires for a separate thermostat. The IoZ System app controls both lighting and temperature and fits in any standard light switch box with a standard rocker switch plate.
Additional system components are the Heat Cool Module (HCM), the Wired Damper Sensor (WDS) & the Zone Control Gateway:
ZCG – The Zone Control Gateway is the central means of communication an our IoZ System app to communicate over the internet no matter where you.
ZCG Overview PLACEHOLDER
LST – Our new Light Switch Thermostat, or Invis-A-Stat™, is a wireless thermostat and light switch that only requires power.
LST Overview
WDS – The Wired Damper Sensor communicates wirelessly with the components of the IoZ System and send power to each pluggable damper. The WDS is also used for each zone to monitor the damper position, duct temperature, pressure, humidity and later IAQ
WDS Overview
HCM – The Heat Cool Module is used to activate the HVAC System for either heat or cool calls. The HCM also communicates wirelessly with the other components of the IoZ System but must be wired to the HVAC unit for operation.
HCM Overview
View our Internet of Zoning – IoZ manuals as step-by-step guides:
IoZ System Overview
App Overview