You’ve likely seen plenty of energy-saving, stay-cool tips in the media this summer — the good news is that it’s not too late to use them.

We’ve compiled our 15 favorites, below. Try them on for size — your family (and your wallet) will thank you!

1. Just like punching the elevator button over and over won’t bring it any faster, so it goes with your thermostat. Resist the urge to press that down arrow a few extra times when you turn on your A/C. Setting the desired temperature to an extra-cold level will NOT cool your home any faster — and could result in excessive cooling and, therefore, unnecessary expense.
2. If you’re planning to take advantage of the federal tax credit with new, energy-efficient windows — choose a model with double glazing and spectrally selective coatings that reduce heat gain.
3. To save up to 50% on your utility bill for cooling, think about replacing your air conditioner with a new, energy-efficient model. Look for the ENERGY STAR® and EnergyGuide labels.
4. Even if you have a relatively new air conditioner, its energy efficiency naturally decreases over time — unless you properly maintain it. Change or clean filters regularly, and have your air conditioner unit serviced annually.
5. Always use a bathroom fan when showering or bathing. Be sure fan is vented to the outside to remove heat and humidity from your home.
6. During the summer, attic temperatures can get up to 140°F — making it difficult to cool a home’s upper levels. Upgrade your attic insulation to prevent heat from infiltrating your air conditioned space. In addition, a radiant barrier installed under the roof deck and/or a continuous ridge and soffit vent can effectively lower attic temperatures.
7. Seal air leaks around windows and doors with weatherstripping and caulk. This helps to keep cool air inside, and prevents hot air from entering your home.
8. Avoid placing lights, TVs or other appliances near your air-conditioning thermostat. The thermostat senses heat from these objects, which can cause the air conditioner to run longer than necessary.

Watch for tips # 9-15 in our next post… and enjoy the rest of your summer!

When summer heat is at its stickiest, homeowners punch the “down” arrow on the thermostat, hoping to cool off the stuffy upstairs bedrooms. Then, with utility bills soaring, they shiver under blankets on the lower levels of the house.

Is it really possible to be comfortable in every room of your home – without breaking the bank?

You bet, say the experts at ZONEFIRST, Inc., a leading manufacturer of HVAC (heating, ventilating and air conditioning) zoning products.

When it comes to solving the age-old indoor comfort problem of “hot and cold spots,” energy savings guides recommend closing off unused rooms, to encourage more airflow to the rooms that need it most. And this works – but only to a point. And it could damage your air conditioning system.

“It’s important to maintain enough airflow through the system,” says Richard Foster, president of ZONEFIRST. “Simply shutting off room outlets – without having enough places for the air to go – is a recipe for potential disaster with your A/C unit.”

Zoning helps you stay comfortable while avoiding expensive air conditioner repairs, says Foster – such as a frozen coil or a failed compressor.

What’s more, zoning your heating and cooling system gets you more than comfortable – it saves you money.

By definition, HVAC zoning systems let you direct heated or cooled air only to the rooms that need it – so instead of cooling the entire house, you cool only the rooms you’re currently using. Studies have shown that shutting off those unused rooms with a zone damper system can save up to 25% on a home’s utility bills, says Foster. “Putting the cooling (or heating) where it’s needed, when it’s needed, increases comfort and saves energy.”

For a ZONEFIRST contractor near you, email info@zonefirst.com or call 1.877.604.1044 (U.S. only). For more information on zoning, visit the company’s website: www.zonefirst.com.

One of the most common homeowner complaints we hear in the HVAC (heating, ventilation and air conditioning) industry is related to “temperature stratification.” In summer, you have a hot, stuffy second floor while the basement rec room feels like a meat locker. Or, in winter, you have that one bedroom that just can’t get warm enough.

Zoning is the answer to your indoor comfort woes — and better yet, it saves you energy and money.

So what IS zoning?

In a nutshell, zoning lets you direct heated or cooled air only to the rooms that need it. Thermostats sense the temperature in each zone, and they tell your HVAC system how much heated/cooled air is needed. A signal is then sent to special motorized dampers in your ductwork (or right in your outlet vents) — which open and close as necessary to direct the air where it’s needed, and “satisfy” the thermostats’ request for a change in temperature.

While zoning isn’t a new concept, homeowners are beginning to hear more about it — especially for existing homes. This is partly due to recent advances in wireless technology — with wireless thermostats, there’s no more threading thermostat wire through your walls (which can be extremely time-consuming and expensive).

Plus, even with a finished basement and no access to your ductwork, you can still zone your home — outlet zone dampers are installed right in your air vents.

Could this be the summer you finally feel comfortable in EVERY room of your home?

For more information on zoning, view our video. Or, for a ZONEFIRST contractor near you, email info@zonefirst.com or call 1.877.604.1044 (U.S. only).

ZONEFIRST has continued to champion the enrgy saving aspects of zone damper systems.  We’ve posted findings from various studies all pointing to the energy saving aspects of zoning.  Of course these same studies show that zoning can also increase your energy use if one keeps all the thermostats at the same temperature.  This solves the comfort issues people experience between rooms but we admit will not save energy.  The savings comes by having the ability to setbackand even turn off the heating or cooling to ununsed zones and by not over heating/cooling rooms in order to get comfortable in another.  See the summary of these reports at http://zonefirst.com/energy_savings.html.

You have a light switch in every room, Why not a THERMOSTAT?  When you leave a room you turn off the lights, do the same for your heating and cooling.  Save energy by shutting off unused rooms and zones.  Energy is expensive and will only continue to increase.  Why waste it in unused rooms?  Green your HVAC System and get Sustainable Savings.  E-mail us at info@zonefirst.com by August 10, 2009 and get a FREE Zoning Panel with your next order.  Orders must be received by 8/14/2009.